Facebook Profile Twitter Profile Linkedin Profile

General ORING Design

O-Rings cannot be damaged by a split or sharp surface since these back-ups are of a continuous molded surface.


Anti-Extrusion Devices for 0-rings


O-Ring, Anti-Extrusion Devices

Billions of O-Rings are used as basic seals for pressures below 1500 psi. Where large clearance gaps or higher pressures are necessary, O-Rings are assisted by leather, PTFE*, hard rubber, backup or other close clearance anti-extrusion devices to prevent extrusion and nibbling.

PTFE* Back-up Washers

PTFE* back-up washers have been used since 1952 to fill a need for better chemical and heat resistance. They reduce friction because small particles of antifrictional material coat the rubbing surface.

The spiral cut, which was the earliest, costs less and is the most popular. It is Government approved for -65° to 225°F for 3000 psi. The single turn scarf-cut is approved at -65°F to 275°F for 3000 psi and offers somewhat better extrusion protection. Both should be installed without overlays at the gap. They may be clipped in the field to fit non-standard sizes. They must be installed carefully to prevent shearing during assembly.

The solid no-cut type generally requires two-piece glands although, in larger sizes, they may be fold-fitted with care into a rod groove and then sized to correct for distortion. This type may be used to 400°F and 5000 psi.

Hard Rubber Back-up Washers

Hard rubber back-ups, having a concave side, are available in many sizes corresponding to standard AS568 O-Ring sizes. The curvature of the backup helps maintain the O-Ring shape under the pressure. Rubber backups are easy to install since they can be stretched into a groove. O-Rings cannot be damaged by a split or sharp surface since these back-ups are of a continuous molded surface.

Back-ups are available in standard nitrile, ethylene propylene, and fluorocarbon.

PTFE* Back-up Washers


Section 1 | Section 2 | Section 3 | Section 4 | Section 5 | Section 6 | Section 7 | Section 8 | Section 9 | Section 10

American Seal & Packing 1537 E. McFadden Ave. Suite A, Santa Ana, CA. 92705
714-361-1435          Fax: 714-593-9701              Web: http://www.americansealandpacking.com/

Customer Review About O-Rings

No Reviews for this Product

Call us at: 714-361-1435 Fax: 714-593-9701

Our Partners

Mechanial Seal Sale Online

SealSales.com carry high quality market seals to suit all types and Gaskets Materials, like PTFE, Single Spring Seals,O-Rings and etc... more...

Seal and Packing

Usseal.com is our Seal and Packing is a leading manufacturer & distributor of mechanical seals, Grafoil, gasket material, cut gaskets... more...

Mechanical Seals

Mechanicalseals.net are engineered for most pumps, mixer and agitator applications in maintenance. more...