|
  Sitemap |
|
Ameri-lon A Superior Gasket Material |
|
|
| Ameri-lon 9504 | Ameri-lon 9510 | Ameri-lon 9500 |
| Ameri-lon
9504 is a true re-structured PTFE gasket sheet with excellent
physical properties to be used in the most demanding applications. Its
unique construction limits the cold flow problems associated with skived
PTFE sheets. It is very effective in applications where available bolt
load is low due to is glass sphere content. Color: Blue |
Ameri-lon 9510
is a true re-structured PTFE gasket sheet
with excellent physical properties to be used in the most demanding
applications. Its specific construction of virgin PTFE and Barium Sulfate
fillers, limits both creep and cold flow in service and at temperature.
|
Ameri-lon 9500
is a premium re-structured PTFE gasket
sheet with excellent physical properties that can be used in most strong
acids, except for Hydrofluoric acid. 9500 is made of 100% PTFE
and silica fillers.
Color: Sand |
HS10 Ameri-lon SheetsAmeri-lon PTFE sheets are available in 24" X 24", 36" X 36", 48" X 48" and 60" X 60" sizes in thick nesses from 0.010" to ¼".
|
|
| Ameri-lon Physical Properties (printable) |
|
Ameri-lon a new family of products using a new hybrid material, Ameri-lon is the result of years of experience in producing PTFE materials. It is designed for a wide range of demanding industrial requirements including gasket and bearing applications. Ameri-lon is filled PTFE, uniquely combining the properties of PTFE and Fller materials. The Filler enhances the physical properties of the PTFE and results in a superior gasket material. Ameri-lon shows less cold flow and greater sealing ability than other filled PTFE materials or Fluorocarbons. It maintains the chemical attack resistance and the temperature range of other PTFE based sheets. Ameri-lon is available in a wide range of products including gaskets, sheet, molded tube and rod as well as finished and machined items Ameri-lon can be considered as an Equivalent to the Garlock Gylon®Product range. The interchange for the Gylon® products is as follows:
|
*Ameri-lon 9504 = Gylon® 3504
*Ameri-lon 9510 = Gylon® 3510
*Ameri-lon 9500 = Gylon® 3500
*Ameri-lon Expanded PTFE = Gylon® 3450/3545
*Amerilon PTFE = Gylon® Chemrex 3570
|
Ameri-lon inquiries can be answered by our Inside sales Staff at 714-593-9780 by Fax at 714-593-9701 or by E-mail at sales@americansealandpacking.com
|
| * This is to be used as a general guide only. All applications
should be considered individually based on the temperature, pressure, media
being sealed, Ph, gasket dimensions, torque load, bolt size and any other factor
effecting the gasket. For assistance in determining the suitability of an
application contact our technical staff at American Seal & Packing. No application should be
undertaken by anyone without independent study and evaluation for
suitability. Never use more than one gasket in one flange joint, and never
reuse a gasket. Improper use or gasket selection could cause property
damage and/or serious personal injury. Data reported in these pages is a
compilation of field testing, field service reports and/or in-house
testing. While the utmost care has gone into publishing the information
contained herein, we assume no responsibility for errors. Specifications
and information contained in these pages are subject to change with
notice. This edition cancels and obsoletes all previous editions.
American Seal and Packing: 1537 E. McFadden Ave. Suite A. Santa Ana, CA. 92705
|
Garlock® is a registered
trademark of Garlock Sealing Technologies.
Gylon® is a registered trademark of Garlock
Sealing Technologies.
Ameri-lon ®
is a registered trademark of American Seal &
Packing
