Grafoil Flexible Graphite Seals and Packing

High Temp GrafoilŽ Seals & Gaskets !!!!

The best thing to happen to the sealing and gasket industry over the last 10 years has got to be Flexible Graphite or GrafoilŽ and we handle all types. Including: Sheet, Ribbon, Braided and Ribbon Pack. At one time it was only used in high temp applications, but like the computer your on ....the prices have come down.

Ribbon Pack used for Valves in the field, or to make die formed packing sets is one of Grafoil'sŽ most common uses. Used in Refineries, Power Plants, Co-Generation Facilities or anyone dealing with high temp applications. We can deliver it to you in any dimension you choose

Flexible graphite, due to it's softness seals great but can also break if bent too far. To make it easier to handle we offer it with a 316 S.S. foil insert, tanged insert, or for easier cutting - no insert at all. Available in a range of grades from automotive & Industrial to Nuclear.

In many applications when oxygen is present and the temperature is over 850 F the ideal sealing material "Grafoil" or flexible graphite cannot be used. Flexible graphite or "Grafoil" will coke at those elevated temperatures when oxygen is present. An excellent alternative in many applications is Mica. Some of the basics on Mica are shown below. As a gasket material Mica can be very effective in sealing those high temp critical applications with out failing due to the presence of oxygen. For more information on Mica click here

Die formed sets for valves in applications that require the lowest of leak rates. Now a standard in the valve industry because of it's effectiveness, Carbon yarn end rings with die formed flexible graphite center rings

Thermabraid Temp: 1200 F Steam, 0-14 pH
A high temperature packing good for most applications. Now available in this braided version that eliminates the need for dies. Great for high temp or chemical applications (non-oxidizing) that can not leak. When you have to have the leak rate near that of a Mechanical Seal in a pump this is the packing to use.

Check out these Videos on Grafoil

Grafoil is Fire Safe How Grafoil is made

Call us at: 714-593-9780 Fax: 714-593-9701

Send mail to Company with questions or comments about this web site.
Copyright Š 2003
Last modified: June 07, 2006
PUMP SHAFT SEALS, TEXFOIL, GARFOIL, HIGH TEMP GASKETS, HIGH TEMP PACKING, STEAM PACKING, CRYOGENIC SEALS, HYDRAULIC SEALS, PUMP, O-RINGS, SEATS, RIBBON PACK, GASKETS, GASKETING, INDUSTRIAL SEAL, FLANGE GASKETS, RING GASKETS, DIE FORMED RINGS, DIE FORM PACKING, V-PACKING, HANDHOLE GASKETS, MANHOLE GASKETS, HIGH TEMP BALL VALVE SEAT, HIGH TEMP SEAT, GRAFOIL TAPE, CONDUCTIVE GASKET, THERMAL TRANSFER, VACUUM SEAL, VACUUM GASKET, EXHAUST SEAL, EXHAUST GASKET, ENGINE SEAL, ENGINE GASKET, AIRCRAFT O-RING, ORING, EXHAUST SEAL, EXHAUST GASKET, HEAT SINK GASKET, HEAT SINC GASKET, HEAT SINK, HEAT SINC, HEATER, THIN FILM HEATER, FLEXIBLE HEATER, EMI SHIELD, RF SHIELD, EMI/RF SHIELD, THERMAL INTERFACE, DIE CUT RING, DIE CUT GASKET, HIGH TEMPERATURE SEAL, HIGH TEMPERATURE GASKET, COMPOSITE MATERIAL, FLANGE, METAL GASKET, SEAL RING, BONNET SEAL, THERMAL, TURBO, NUCLEAR, CLAD O-RING, KNITTED WIRE MESH, WIRE RING, FILTER RING, KNITTED METAL SEAL, KNITTED METAL FILTER

	Ribbon Pack used for Valves in the field, or to make die formed packing sets is one of Grafoil'sŽ most common uses. Used in Refineries, Power Plants, Co-Generation Facilities or anyone dealing with high temp applications. We can deliver it to you in any dimension you choose
	Flexible graphite, due to it's softness seals great but can also break if bent too far. To make it easier to handle we offer it with a 316 S.S. foil insert, tanged insert, or for easier cutting - no insert at all. Available in a range of grades from automotive & Industrial to Nuclear.
	In many applications when oxygen is present and the temperature is over 850 F the ideal sealing material "Grafoil" or flexible graphite cannot be used. Flexible graphite or "Grafoil" will coke at those elevated temperatures when oxygen is present. An excellent alternative in many applications is Mica. Some of the basics on Mica are shown below. As a gasket material Mica can be very effective in sealing those high temp critical applications with out failing due to the presence of oxygen. For more information on Mica click here
	Die formed sets for valves in applications that require the lowest of leak rates. Now a standard in the valve industry because of it's effectiveness, Carbon yarn end rings with die formed flexible graphite center rings
	*Thermabraid Temp: 1200 F Steam, 0-14 pH* A high temperature packing good for most applications. Now available in this braided version that eliminates the need for dies. Great for high temp or chemical applications (non-oxidizing) that can not leak. When you have to have the leak rate near that of a Mechanical Seal in a pump this is the packing to use.

High Temp GrafoilŽ Seals & Gaskets !!!!

Send mail to Company with questions or comments about this web site. Copyright Š 2003 Last modified: June 07, 2006

Send mail to Company with questions or comments about this web site.
Copyright Š 2003
Last modified: June 07, 2006